Home ยป A Guide to Keeping Your Ride-on Mower in Excellent Condition

A Guide to Keeping Your Ride-on Mower in Excellent Condition

by Guest Writer

Most ride-on mowers only need basic maintenance, such as changing the oil, to keep them running well for many years. Of course, with any machine, there are going to be specific problems that come up from time to time, and knowing how to deal with these problems will help keep your ride-on mower running like new. Here are some tips to keep in mind when your mower starts acting up, so you can get it back into shape without too much hassle.

Clean the engine

The engine of a ride-on mower is the most important part of the machine. If the engine isn’t clean, you may find that it’s running slower than before, or maybe not at all. This is because a dirty engine can cause a buildup on carburetors and other parts. In order to prevent this, it’s important to regularly clean your ride on mower’s engine with a high quality cleaner like Coastal Mowers Engine Cleaner. It will remove dirt, grime, and other contaminants from the surface of the engine and help keep your ride on mower running smoothly for years.

Lubricate the bearings

It is recommended that you lubricate the bearings of your ride on mower at least once per year. If you have a bearing that is difficult to remove, it may be time for a new one. Some bearings are not meant to be removed as they use press fit technology. Speak with Coastal Mowers about what bearings are best for your mower. You can also go online and find various guides or videos on how to properly lubricate your bearings. These will give you tips on how to take them apart if need be, clean them out and put them back together.

Check tire pressure and treads

Check the tire pressure and treads on your ride-on mower. It’s a good idea to change the oil, blades and spark plugs annually. Changing the air filter is also recommended. Coastal Mowers can help you with any other repairs you might need for your mower! If you are looking for the best ride-on mower repair near me give us a call or stop by our showroom today. We have experience repairing all types of ride-on mowers and will get your machine running like new in no time.

Change oil

It’s important to change your ride-on mower’s oil regularly. This will help keep it running like new. If you forget and the engine starts leaking, don’t worry – you can take it for a ride on mower repairs near me! The good news is that changing the oil is easy and only takes a few minutes of your time. Below are a few steps that will lead you through this process.

  • First remove the spark plug wire from the spark plug
  • Place a drain pan under the engine
  • Remove the drain plug using an adjustable wrench
  • Wait until all of the oil has drained out before removing any other plugs or parts
Remove buildup from the underside of the mower deck

Removing buildup from the underside of the mower deck is a relatively easy way to keep your ride-on mowers running like new. When you’re mowing, debris and grass clippings can build up on the underside of the deck and cause problems like increased fuel usage and a clogged air filter. There are two methods for removing this buildup: Pulling or Pushing.

First, start by disconnecting the spark plug wire from the spark plug on top of the engine block. Next, use an air compressor to blow any loose material off of the underside of the deck before beginning either method.

Next, use a vacuum cleaner with an extension tube (or broom) connected to it to remove any remaining material while standing behind or beside the rear tire. The second option involves pushing down on one side of the blade with your foot while simultaneously pulling down with one hand near where it meets with its housing (you may need someone else’s help). Continue this process until you reach both sides and then repeat for other side if needed.

You may also like

Leave a Comment